Fantech Exhaust Fan | Attic Exhaust Fan | Inline Exhaust Fan

All You Need To Know About The  Fantech DBF110 Series Dryer Booster System

If you are looking for a pressure sensing switch, that is specifically designed for dryervent booster applications in residential areas, then the Fantech DBF110 Series Dryer Booster System, is what you need for your home. The good thing about this fan is that not only can you mount it at any angle along the duct work, allowing straight airflow, it is also easily installable because it uses FC type mounting clamps that make it easy to remove it for service from the duct work.

Some of the guide specifications that you need to know about this particular vent booster system are several especially those concerning construction.

It has a motorized impeller, that is external, and that has class B installation, which has a completely closed off capacitor that is permanently split. It also is protected by the use of an automatic reset thermal overload. The bearings are completely sealed off and are fitted with ball types that are self lubricating. With all these features in perfect condition, you can be assured that this fan dryer’s motor, will give you optimum service.

Another thing that you need to be well informed of, is the housing for the Fantech DBF110 Series Dryer Booster System. The housing is made of ABS-PC blend which is a thermoplastic, that is UV resistant. This fan’s capacitor other than being provided, is also located within its electrical terminal box. It also is supplied with pre-wired terminal strip connections that complement the integral electrical box, that is external.

In order to operate vibration free, the fan wheel is fitted with a motorized impeller that is both dynamically and statically balanced, to create one integral unit. For maximum performance the DBF110 Dryer Vent Booster System’s fan wheel is inclined in a backward inclined position.

Another very important gadget, that is fitted in this dryer fan you absolutely need to know about. is its switch. In order for the fan to maintain a performance of 10 minute intervals, until the drying cycle is complete, it incorporates a delay-on-break timer. It also has been set to a static pressure of of 0.05”. This switch has been pre-wired and mounted on the fan. The switch is pressure-sensing and is fitted in the fan electrical junction box.

This dryer booster fan has been approved by the UL and CSA for equal safety. The temperatures according to the approval license, should not exceed 60 degrees Celsius.

On purchase of this item, you will be provided with a user’s manual that will help to guide you in the operation of the machine.

This manual also contains trouble shooting tips that should be really helpful to the novice.

Some of these tips include: removing the tubing from the nipple that is on the fan and blowing gently into the tubing, if the fan fails to start and the diaphragm is already in a vertical position. In case this fails to start the fan the manual gives you a couple of guidelines to follow to determine the source of the problem for your Fantech DBF110.